Here is the dash, front door, and rear door wiring on the HRV...
The dash and door speakers are wired in parallel.

 

Sorry, missed yours is an LX............no idea if it's the same as my EX.
Probably not as your head unit is different.

$10 here will get you all the schematics and procedures you want to download for 24-hours.
Will include information specific to your LX.

https://techinfo.honda.com/rjanisis/logon.asp

 

Thanks. Tomorrow I'll probably start poking around regardless. I was just hoping for a possible shortcut on here.

I'll bookmark the techinfo link in case I get into trouble.....

Still open to any other's advice who may have already looked behind their LX's head unit.

 

Just pulled the head unit and visually checked the wiring. I found four nicely twisted pairs of wires. And it looks like the wire colors are corresponding to the EX diagram you posted.

Blue/Light Blue, Purple/Gray, Red/Pink, & Green/Light Green. Polarity will be easy enough to figure out. And chances are the lone Purple will be my ACC turn on. I'll test this tomorrow as well.

All in all....progress!

 

Just FYI for those searching, the lone purple wire is what I used to splice into for my remote wire. Works perfectly for me.

 

I think we need to bulk purchase a dropbox cache
One person buys 24 hours, downloads all the data, puts in a drop box to share with others!

 

IMO $10 for 24 hours is more than reasonable ... albeit time consuming.

OTOH having a digital copy is certainly more convenient than printed copy.

 

With the wealth of information available through Tech Info 24-hours is not enough to cover even a small portion of the schematics and procedures in there.
Also, there is information specific to different models and VIN ranges.........

It often asks for your VIN to get you the correct information.
IMHO if you need the information $10 is nothing to pay..........I've done it twice now for procedures I needed.

 

This will help me this weekend installing my B2 amp!

 

Hi. Im new in this forum. Im trying to install a new speaker set but i have the same problem finding what wire color is for each speaker. I've read this Blue/Light Blue, Purple/Gray, Red/Pink, & Green/Light Green.
but.. which is positive and negative?

Could be like this?

Blue = +
light blue -
Purple = +
Gray = -
Red = +
Pink = -
Green = +
Light Green = -

Is that it?

Regards!

 

Did you manage to get answer in your querries?

 

According to the Tech Info, these are the Positive/Negative colors:

Connector A15, Blue = +
Connector A16, Light Blue -
Connector A5, Purple = +
Connector A6, Gray = -
Connector A19, Red = +
Connector A20, Pink = -
Connector A9, Green = +
Connector A10, Light Green = -