Honda HR-V Forum banner

Android Head Unit Upgrade

1 reading
160K views 340 replies 55 participants last post by  Dr. Toboggan  
Did you try downloading the service manual?

Thanks for sharing. I can't seem to download it or even get it to load completely on my phone or laptop. They're both pretty quick and so is my internet. It hangs on chrome and Microsoft edge browsers on the PC and Opera browser on my phone.
The reddit post has a link from google drive too.

Now, to find one for the 2019+.
In reference to:

Found a PDF service manual on Reddit, and it looks like it does require the HDS to put it in maintenance mode. From the way it sounds, though all maintenance mode does is use the EPB module to fully release the pressure from the caliper rather than doing it manually with the module removed. If done manually, it also recommends you replace the two mounting screws and the o-ring when reattaching. To adjust the EPB, apply the parking brake, press the pedal down, and the release it.

Here's a link to the Reddit thread with the PDF:
Rear brake procedure starts on pg 1435
That is... assuming the post above, by KhangTran476, isn't a "one-hit-wonder."
 
Oh, that port.

Maybe it's just a really unfortunate coincidence, that the circuits controlling blue are unstable (lack of B in RGB makes Y, I had the same issue on my last RGB keyboard)
 
RGB is red/green/blue. The LEDs inside (the Dasaita) mix those three colors in varying degrees to make pretty much any color the designers are willing to offer.

So, when your power button looked yellow, it's because the blue isn't working. When you have only red and green, you get yellow. You need all three to make white light (without using a plain white LED). Could by a faulty blue LED. Could be a damaged circuit. Could be interference... who knows.