[Peeygee]

I was reading through the owners manual and in the oil change section it mentions removing the lower cover for access, 2WD models only. Sure enough there is no cover on my AWD LX. This means easy access to the oil filter and sump plug but also the bottom of the motor is exposed to mud and winter salt spray. I'm guessing it is a clearance issue but I might try to modify and fit a cover to keep off the road crap, depending on the cost of the plastic panel.


The Honda OEM cover part # is 7411-T7W-A00



Or maybe a metal bash plate if one becomes available, no plans for off roading but they look cool

Hello! I have a 2016 HRV Ex-L Navi AWD with no splash guard installed. I notice an extra 3/4" reinforcement on the crossmember under the transfert case which prevent to install the original splash guard. I ordered the part from Honda & I trimmed it of by 2" of the rear part. All other 6 screws were installed as per Honda specs. For now, I used TyRaps for the rear end but on my next oil change, I will weld fit some plastic extender from the part I previously cut off & install better fastener.
The part cost at regular price at Honda: $67cdn + hardware. I assume that it will cost me $7000 in gasoline in the next 4 years & if I save 0.5% in fuel economy, it will be paid off & all the mud, salt, etc won't get to my engine. I presumed Honda will built one that fit in 2017 so you may wait for it & buy it already trimmed!!